Menu
Suitable for diagnostic brake measurement and for periodic technical inspection of vehicles with maximum 3.6t axle weight. The divided mechanical roller brake tester unit can be sunk level with the ground. It is mounted with special wheel slip sensors and load cells to measure brake force. Upgradeable with axle load measurement (ERBT-3.6/M2-W or ERBT-3.6/U2-W). The equipment and the measurements are controlled by Energoline® test lane software.
Requirements for installation:
Maximum axle load for measurement: 3.6 t
Minimum track width: 850 mm
Maximum track width: 2160 mm
Roller diameter: 160 mm
Roller width: 655 mm
Rear roller elevation: 20 mm
Roller surface: epoxy-based corundum
Roller friction (dry / wet): 0.8 / 0.6
Measurement speed (ERBT-3.6/M2): 3.6 km/h
Measurement speed (ERBT-3.6/U2): 4.7 km/h
Measurement range (ERBT-3.6/M2): 0-7.5 kN
Measurement range (ERBT-3.6/U2): 0-6 kN
Measurement accuracy: ±1%
Installed dimensions (W x L x D): 2380 x 760 x 260 mm
Corrosion protection: galvanised
Drive power: 2 x 3.8 kW
Supply: 3 x 400 V
Fuse: 3 x 25 A
Axle load measurement (ERBT-3.6/M2-W and ERBT-3.6/U2-W):
Axle load measurement range: 0-3.6 t
Axle load measurement accuracy: ±1%
Standard equipment:
Accessories:
Optional accessories:
MENU:
