Menu
Suitable for diagnostic brake measurement and for periodical technical inspection of commercial vehicles, trucks and buses up to 13 t / 18 t axle load. The divided mechanical unit has built-in electronic power boxes. Installation on inspection pit is recommended. The roller sets are mounted with load cells to measure brake force and special sensors to detect wheel slip. Upgradeable with axle load measurement (HF-BDW). The equipment and the measurements are controlled by Energoline® test lane software.
Requirements for installation:
(HF-BD 13/30 / HF-BD 18/40)
Maximum axle load: 13 t / 18 t
Minimum track width: 850 mm
Maximum track width: 3050 mm
Roller diameter: 227 mm
Roller length: 1100 mm
Roller elevation: 50 mm
Roller surface: epoxy-based corundum
Roller friction (dry / wet): 0.8 / 0.6
Measurement speed: 2.18 km/h / 2.41 km/h
Measurement range: 0-30 kN / 0-40 kN
Measurement accuracy: ±1 %
Installed dimensions (W x L x D): 3440 x 1140 x 850 mm
Corrosion protection: galvanised
Drive power: 2 x 9.2 kW / 2 x 11 kW
Supply: 3 x 400 V
Fuse: 3 x 50 A / 3 x 63 A
Axle load measurement (HF-BDW)
Axle load measurement range: 0-13 t / 0-18 t
Axle load measurement accuracy: ±1 %
Standard equipment:
Accessories:
Optional accessories:
MENU:
